Two Case names
Case built threshing machines in Racine, Wisconsin, long before it built gasoline tractors. Its farm business later sat alongside International Harvester’s, which made the Farmall line.
In 1984, Tenneco bought International Harvester’s agricultural equipment business. The combined farm business used the Case IH name from the mid-1980s. In 1999, New Holland and Case were brought together under CNH, which still owns both brands. For the older IH story, see what company made red tractors.
The Case IH 385
The Case IH 385 was a compact utility tractor built from 1985 to 1990. According to the research for this article, it was built in Doncaster, England. Its main features were:
- Engine. A 2.5-litre (D155) three-cylinder diesel, rated at 43 engine hp and 35 PTO hp by TractorData.
- Transmission. An 8-speed synchromesh gearbox, a 16-speed partial power shift, or an 8-speed power shuttle, depending on the version.
- Drive and brakes. Two-wheel drive, or an MFWD version with four-wheel drive, with power steering and hydraulic wet disc brakes.
- Hitch and PTO. A Category I and II rear three-point hitch with a lift capacity of about 2,158 lb, and an independent 540 rpm PTO.
- Weight. About 4,869 to 5,940 lb, depending on the version.
The 385 suited haymaking, loader work and general farm chores. A discussion among IH enthusiasts concludes that the International Harvester 385 and the Case IH 385 are mechanically the same, apart from paint and grille. Check the badge and the model designation on the plate before you assume which name a machine carries.
Identifying a 1980s Case or IH tractor
- Badge and plate. Both names can appear on the same design, so read the model designation and serial number rather than the badge alone.
- Transmission type. The 385 came with three gearbox options. Knowing which one a tractor has matters for parts and for repairs.
- Drive type. Two-wheel drive and MFWD machines use different front-end parts.
Parts and service
Parts for many older Case and IH tractors are available through dealers, aftermarket suppliers and salvage. Availability depends on the model and its age, so check the parts you need against the model and serial number before you buy. Manuals and parts catalogues exist for the 385.
Common questions
Where is Case IH manufactured? Case IH has built tractors in several countries over the years. The 385 was built in Doncaster, England. For another model, check the build location on its data plate or in its documentation.
How many HP is a 2290 Case tractor? This guide does not give a horsepower figure for the 2290, because the research did not confirm one. Check the exact model against a manufacturer’s specification sheet before you rely on any figure.
Are New Holland and Case tractors the same? No. They are separate brands with separate product lines, and both are owned by CNH. Do not assume that a New Holland and a Case of similar size are the same machine.
Can you still get parts for Case tractors? For many models, yes, through dealers, aftermarket suppliers and salvage. For older or less common models, parts can take longer to find, so check availability before you buy.
Which 1988 Case tractor?
Searches for a “1988 Case tractor” may refer to a particular model from that year. This guide has not confirmed which model is meant, so check the serial number and model designation on the machine itself.
The modern Magnum 385 is a different machine
The Case IH Magnum 385 is a high-horsepower row-crop tractor, not the 1980s utility tractor. It has an 8.7-litre engine rated at 385 hp and a CVXDrive transmission. Do not use its specifications for the older 385.
For the Steiger story, which involves Tenneco and the Case brand, see Steiger, Versatile and Knudson. For the wider picture, read famous tractor brands and their colours.