The Massey Ferguson 35 and the MF 202 are two two-wheel-drive tractors from the late 1950s and 1960s. The 35 was a general-purpose utility tractor for farms, landscaping and light industrial work. The 202 was a heavier-duty industrial model, part of the line many owners call the Work Bull. Both were offered with a Continental four-cylinder gasoline engine, and the 35 was also available with a Perkins diesel. For brand background, see Ferguson and Massey Ferguson tractors from the TE20 onward.
Massey Ferguson 35 Utility
The MF 35 Utility was built mainly in the early to mid 1960s, although sources give slightly different dates. It was sold for general farm work, landscaping and light industrial jobs. Its 72-inch wheelbase and Category I three-point hitch suit small acreage and property work.
Engines, power and transmissions
- Engines: a Perkins 2.5 L three-cylinder diesel, or a Continental 2.2 L four-cylinder gasoline engine.
- Transmissions: a 6-speed gear transmission, a 12-speed partial power shift, or a 4-speed mechanical shuttle. All are two-wheel drive.
- Power: published tests put PTO power near 37 hp and drawbar power near 32 hp.
- PTO and hitch: a 540 rpm rear PTO and a Category I three-point hitch.
- Weight: roughly 2,980 to 3,560 lb, depending on version.
Engines and transmissions vary by version, so check the configuration of the tractor you are looking at.
Massey Ferguson MF 202 Work Bull
The MF 202 was built as an industrial utility tractor, a heavier-duty counterpart to the MF 35. Sources give its production as roughly the late 1950s to the late 1960s, so check the serial range for your machine. One owner discussion notes that its heavy front axle and power steering suit utility work.
Features listed in sources:
- Engine: Continental 2.2 L four-cylinder gasoline, about 40 net hp.
- Transmission: 6-speed gear, or 6-speed mechanical shuttle. Two-wheel drive.
- Steering and brakes: power steering and mechanical drum brakes.
- Weight: about 3,060 lb.
- Tires: 14.9-24 rear tires are commonly fitted.
- PTO and hitch: an optional 540 rpm rear PTO and an optional Category I hitch.
The 35 and the 202 side by side
| MF 35 Utility | MF 202 Work Bull | |
|---|---|---|
| Build years | Mainly early to mid 1960s | Roughly late 1950s to late 1960s |
| Intended use | General farm, landscaping, light industrial | Industrial utility |
| Gasoline engine | Continental 2.2 L four-cylinder | Continental 2.2 L four-cylinder |
| Diesel engine | Perkins 2.5 L three-cylinder | Not listed in sources |
| Transmission | 6-speed gear, 12-speed partial power shift, or 4-speed shuttle | 6-speed gear or mechanical shuttle |
If you are comparing these with a later utility model, see the Massey Ferguson 135 and 235. The MF 65, a larger 1957 to 1965 model, is covered in Massey Ferguson 65: specs, history and value.
Parts, maintenance and buying notes
Owners discussing the MF 202 on Reddit generally report good parts availability for gasoline gear-drive versions. A reprint of the MF 202 operator’s manual is available from some vintage tractor suppliers.
Checks that apply to most tractors of this age:
- Hydraulic fluid and reservoir: check the level and look for leaks. One owner advised watching for a dry or leaking large O-ring at the bottom of the reservoir.
- Steering and brakes: test the power steering and the mechanical brakes, and check pedal travel and adjustment.
- PTO: inspect the 540 rpm shaft and guard before running implements.
- Tires: check age and condition, especially on the large rear tires.
What is the price of a Massey Ferguson 35 tractor?
There is no single price. Used MF 35s vary with engine type, condition, running hours, attachments and location. The best guide is recent sold listings and auction results for the same model and engine, rather than a single asking price. For Massey prices more broadly, see what a Massey tractor costs.