The Massey Ferguson 135 is a two-wheel-drive utility tractor built from 1964, with a three-cylinder Perkins diesel rated at about 45.5 hp. The 235 is usually discussed next to the 135, but published figures for it are harder to pin down and vary by source. This guide covers the 135 in detail and explains what can and cannot be confirmed about the 235.
Massey Ferguson 135 at a glance
| Feature | Detail |
|---|---|
| Built | From 1964. Sources differ on the end date; one lists UK production until 1979. |
| Engine | Perkins AD3.152, three-cylinder, liquid-cooled diesel, rated about 45.5 hp (33.9 kW). Some listings also describe gasoline-engined versions. |
| Transmission | Gear type, 6 forward and 2 reverse gears, with an optional partial power shift |
| Drive and steering | Two-wheel drive, manual steering |
| Brakes | Mechanical, double expanding shoe |
| PTO | 540 rpm rear PTO |
| Hitch | Category I three-point hitch, lift capacity about 2,840 lb |
| Weight | About 3,130 lb (1,420 kg) |
| Size | 120.5 in long, 63.4 in wide, 53.9 in tall |
| Operator station | Open, no cab |
| Tires | 5.5-16 front, 12.4-28 rear |
Specifications can differ by version, market and serial range, so check the serial range before relying on a figure.
Was the Massey Ferguson 135 a good tractor?
By the accounts we checked, the 135 is valued for its simple mechanics and reliability. Its open station, 45.5 hp rating and six-speed gearbox mean it suits light to moderate utility work better than heavy, all-day jobs. Whether it is a good fit depends on the work you plan to do.
What the 135 is suited to
A 45.5 hp tractor with a 540 rpm PTO handles utility tasks such as mowing and tilling. The size of implement it can run depends on the work and the ground. As a rough guide from one equipment reference, a tractor of this size is generally matched to rotary cutters up to about 5.5 feet and tillers up to about 4.5 feet. Check the implement manual before buying, because requirements vary.
For a larger, older model, see Massey Ferguson 65: specs, history and value.
How many horsepower is a Massey Ferguson 235?
Published horsepower figures for the 235 are harder to confirm than the 135’s, and the figures that exist vary by source and by version. Do not rely on a single number. For the model you are considering, check its spec sheet and operator’s manual, and compare the engine rating with any PTO or drawbar figure, since those are measured differently.
Model years, serial numbers and variants
Build years, transmissions and features depend on the serial range and the market the tractor was sold in. Before comparing specs, find the serial range that applies to your tractor. For help reading a serial number and estimating a build year, see how to date a Massey Ferguson tractor by its serial number.
For the earlier utility models, see Massey Ferguson 35 and MF 202. For the brand’s history, see Ferguson and Massey Ferguson tractors from the TE20 onward.
Parts, manuals and maintenance
The 135 uses a Perkins AD3.152 engine, so engine filters are listed by engine model. Oil, air, fuel and hydraulic filters for that engine are listed by parts retailers, but confirm the part number against the engine serial plate before ordering.
Service and operator manuals are available in print and digital form. Follow the service intervals in the manual. They cover engine oil and filter changes, hydraulic fluid checks, greasing and inspection.
How much is a Massey Ferguson 135 worth today?
There is no single figure. A 135’s value depends on its condition and how it is equipped. Buyers often check for:
- wear in the Multi-Power or partial power shift hydraulics, if fitted
- brake condition
- front axle and steering wear, especially on a tractor used with a front loader
- how the engine runs under load
- tires and attachments
Recent sold listings and auction results are the best guide. Asking prices and older forum figures can be out of date.