Tractor History

When Rubber Tires Replaced Steel Wheels on Tractors

Tractors moved from steel lugs to rubber tires in the 1930s. Here is the timeline, the Allis-Chalmers WC, and how radials and newer designs followed.

On this page
  1. Steel lugs and their drawbacks
  2. Early rubber experiments
  3. The Allis-Chalmers WC and the 1934 Nebraska test
  4. How fast the switch happened
  5. Bias-ply, then radials
  6. Newer designs: IF/VF and CTIS
  7. Rubber on vintage tractors today
  8. Keep reading

The switch from steel wheels to rubber tires happened mainly in the 1930s. The Allis-Chalmers Model WC is usually credited as the first tractor sold with pneumatic tires as standard. Sources differ on the exact year and on how fast the change spread, so this article gives ranges where the sources disagree.

Steel lugs and their drawbacks

Early tractors used steel wheels with metal lugs, or cleats, for grip. Those wheels gave a rough ride, lost power to slippage, and damaged hard-surfaced roads. As rural roads expanded in the 1920s, highway authorities objected to the damage that metal-lugged wheels did to tarred surfaces. Better traction and a smoother ride pushed the industry toward rubber.

Early rubber experiments

Rubber on tractors was not a 1930s idea. NTS Tire Supply’s history of farm tires says R.W. Thomson of Edinburgh tried pneumatic tires on his road steamer in 1845, and the experiment did not work out in practice. In 1918, International Harvester fitted a production tractor with rubber: solid rubber on the front wheels, and solid rubber blocks on detachable metal lugs at the rear. These early steps showed that rubber could work on a tractor, but they were not yet the pneumatic tires that later changed the industry.

The Allis-Chalmers WC and the 1934 Nebraska test

The Allis-Chalmers WC is the tractor most often credited with coming standard with pneumatic tires. Yokohama’s account dates it to 1933, and NTS’s account places the key test in 1934. NTS reports that the first official Nebraska Tractor Test of a pneumatic-tire tractor was held in May 1934. In that test, the WC got about 8.2 horsepower-hours of work per gallon of fuel on rubber, compared with about 5.6 on metal lug wheels. The result showed that better traction also meant better fuel use.

How fast the switch happened

Sources give different numbers. One account says about 14 percent of tractors had pneumatic tires in 1934 and about 95 percent by 1940. Another says about 14 percent in 1935, about 43 percent in 1937, and nearly every tractor by 1950. We could not check the original figures, and they may measure different things. Either way, the change was quick. For a vintage owner, the practical point is that machines built from the late 1930s onward were often sold with rubber, while earlier ones usually were not.

Bias-ply, then radials

Bias-ply tires, with plies running diagonally from bead to bead, were the early standard on tractors. They are sturdy and still common on chore tractors and some older machines. Radial tires, with plies set at right angles to the direction of travel and steel or fabric belts under the tread, were invented in 1946, according to NTS. They reached tractors in the 1970s, per Yokohama, and have since become common on larger farm tractors. Radials generally offer a larger footprint and more even wear, which is one reason farms moved to them.

Newer designs: IF/VF and CTIS

Increased-flexion (IF) and very-high-flexion (VF) tires, introduced in the early 2000s, use flexible sidewalls and steel belts to carry more load at the same pressure, or the same load at lower pressure. Central tire inflation systems (CTIS) let an operator adjust tire pressure from the cab, for road travel or for field work. Both appear on modern machines.

Rubber on vintage tractors today

Many antique tractors still run on steel wheels or lugs. Some owners fit rubber tires or conversion kits, which exist for many popular models. Old rubber is a safety question. Tires can dry out, crack or hide internal damage even when the tread looks fine, and rims can corrode or crack. Before you fit or inflate old tires, check the date codes on the sidewall, and have a tire specialist or an experienced restorer look at the tire and rim. Do not run a tire that shows cracking or bulges.

Keep reading

For the wider story, read the history of the farm tractor. The gasoline machines of the same era are covered in the first gasoline tractors. For why steam lost ground on farms, see why steam tractors disappeared, and for the steel-wheeled machines of the earlier era, see steam traction engines.

The complete guide to tractor history

The History of the Farm Tractor: From Steam to Diesel
Read the guide

Keep exploring

Guides from other topics

All topics →