The farm tractor did not appear all at once. It grew out of steam traction engines in the 1800s, moved to gasoline and kerosene engines in the 1890s and early 1900s, and then to diesel and the machines we know today. This guide follows that path and links to deeper articles on each stage. The word itself comes from the Latin trahere, “to pull,” which you can read about in where the word tractor came from.
Before the tractor: animals and steam engines
For most of the 1800s, farms ran on horses, mules and oxen. Steam traction engines began appearing in the 1840s and 1850s. They could haul loads and pull plows, and they powered threshing machines. They were powerful, but they were also heavy, slow to move, expensive, and dependent on steady supplies of water and fuel. A steam engine needed a crew to run it. Those limits are why inventors kept looking for a better source of power. The steam traction engines article covers these machines in more detail.
The first gasoline tractors
In 1892, the Iowa inventor John Froelich and his blacksmith, Will Mann, built a machine that combined a one-cylinder gasoline engine of about 16 horsepower with the running gear of a steam traction engine. Froelich had grown frustrated with steam threshing, which was heavy, hard to maneuver, and could set grain and stubble on fire on a windy prairie. That fall, the machine went to South Dakota, where it powered a J.I. Case threshing machine. Accounts report that it threshed about 72,000 bushels that season. Froelich’s machine is usually credited as the first successful gasoline tractor.
Success did not come quickly. Froelich’s backers formed the Waterloo Gasoline Traction Engine Company, which sold few tractors at first and made stationary engines to bring in income. Froelich left the company after it was incorporated in 1895. In 1918, John Deere bought the Waterloo company, which put Deere firmly into the tractor business. The first gasoline tractors article looks at Froelich’s machine and the Waterloo line in more depth.
Tractors in the 1900s and 1910s
Many manufacturers entered the market in the early 1900s. Hart-Parr is often credited with popularizing the word “tractor” and with building one of the first commercially successful two-cylinder gasoline tractors in 1903. International Harvester (IH) built a line of Titan tractors starting around 1910 and 1911. The best-known Titan was the 10-20, rated at 10 horsepower on the drawbar and 20 on the belt. It was built from 1915 into the early 1920s, and by one count roughly 78,000 were made.
Early tractors ran on steel wheels with lugs. That gave a rough ride, wasted power through slippage, and damaged hard-surfaced roads. The fix, rubber tires, is covered in when rubber tires replaced steel wheels.
Mass production: the Fordson and the Farmall
The biggest change in price came in 1917, when Ford introduced the Fordson Model F. It was a mass-produced tractor that cost less than many rivals, which put mechanized power within reach of smaller farms. Competitors had to respond, and the price pressure reached the Titan line too.
In the mid-1920s, International Harvester introduced the Farmall, a general-purpose row-crop tractor. Its design let a farmer plant, cultivate and haul with one machine. That versatility helped the tractor move from a heavy field engine to an everyday farm tool. Steam had lost out to these lighter, cheaper machines; the article on why steam tractors disappeared explains the reasons.
Rubber tires, diesel and the three-point hitch
Three developments in the 1930s changed how tractors worked:
- Rubber tires. Steel wheels gave way to pneumatic tires in the 1930s. The Allis-Chalmers Model WC is usually credited as one of the first tractors to come with rubber tires as standard. Sources give slightly different dates for it, and they disagree on how quickly most tractors switched.
- Diesel engines. Diesel engines began appearing in tractors during the 1930s. They offered better fuel economy and more torque, which suited heavy work.
- The three-point hitch and hydraulics. Harry Ferguson’s three-point hitch and hydraulic lifts made implements easier to attach, raise and control. The power take-off (PTO) let a tractor run implements such as mowers and balers through a rotating shaft.
When tractors replaced horses
By the middle of the 20th century, tractors had largely replaced draft animals on American farms. One operator could cover more acres in a day than a team of horses, and farms grew larger as a result. The change was not instant, and it varied by region, but it was one of the most important shifts in farm life.
Modern tractors
Today’s tractors have enclosed cabs with climate control, far larger engines, four-wheel drive, and in some cases tracks. Many use GPS guidance and automated steering. Others carry sensors that track soil and machine data. Autonomous and electric prototypes are being developed, though diesel remains the common choice for larger farm tractors. Tracked machines have a long history, which is covered in early crawlers and giants.
Common questions about tractor history
When did tractors become a thing?
Practical gasoline tractors appeared in the 1890s. They spread through the 1910s and 1920s and were common on many farms by the mid-20th century.
How much does a tractor cost?
The price depends on age, make, horsepower, condition, and whether it runs. Vintage machines vary widely. Check recent sales of the same model, and have a knowledgeable mechanic inspect any machine before you buy it. We have not included price figures here, since they change over time and vary by region.
Why did John Deere never see a tractor in his life?
John Deere, the founder of the company, died in 1886. The first successful gasoline tractor came in 1892, so he did not live to see one. The company later bought the Waterloo tractor business in 1918.
What is tractor horsepower?
Tractor horsepower ratings can mean different things. Drawbar horsepower measures pulling power at the hitch. Belt horsepower measures power delivered to a belt pulley for stationary work. PTO horsepower is measured at the power take-off shaft. The Titan 10-20 is a good example: it was rated at 10 horsepower on the drawbar and 20 on the belt.
What do tractors do?
Tractors pull and power implements such as plows, planters, mowers, and loaders. They also provide stationary power through the PTO or a belt. Their main job is to supply the pulling and power that a farm needs.
What are the top 10 tractor brands?
We are not ranking brands here, because a ranking depends on the era, the country, and what is being measured. Historic American names include John Deere, International Harvester (Farmall), Ford, Allis-Chalmers, Case, Massey Ferguson and Oliver. The first gasoline tractors article covers the International Titan in more detail.
What is considered an antique tractor?
There is no single rule. Many collector clubs and shows use an age limit, but the cutoff differs by club and by event. If you plan to attend a show, check the rules of that event or club before you enter a machine.
Keep reading
If you want to go deeper, start with steam traction engines for the machines that came first. The biggest steam tractor article covers the largest operating example. For questions about road use and surviving engines, see are steam tractors street legal and the oldest steam engine still in operation.