Tractor History

Steam Traction Engines: The First Steam Tractors and Case Steam Models

What steam traction engines were, how they differed from steam tractors, how steam plowing worked, and what the Case steam models were known for.

On this page
  1. Steam traction engines and steam tractors
  2. Did tractors exist in the 1800s?
  3. Steam plowing and hauling
  4. Case steam engines and their models
  5. The 150 HP Case and plowing
  6. How fast and how heavy?
  7. Keep reading

Steam traction engines were among the first powerful, self-propelled machines to work on farms and on roads. Some were later called steam tractors, and the names overlap, so this article starts with definitions. It then covers steam plowing and the Case steam models, which are the names most often asked about.

Steam traction engines and steam tractors

A traction engine is a steam engine mounted on wheels or tracks that could move under its own power and pull loads. Many traction engines also drove farm machines by belt. The term “steam tractor” is broader. Wikimedia Commons, which classifies photos of these machines, describes steam-powered tractors as machines that are not recognisably traction engines, and it treats “light steam tractors” as a sub-type of traction engines. In practice, collectors, museums and sellers do not always use the terms the same way, so check what a seller or museum means before you rely on a label.

Did tractors exist in the 1800s?

Yes, in one sense. Steam traction engines began appearing in the 1840s and 1850s, and by the late 1800s they were used for plowing, hauling and threshing in Europe and North America. Gasoline tractors came later. The first successful one is usually dated to 1892, when John Froelich built his machine in Iowa. The history of the farm tractor article places steam in the wider timeline.

Steam plowing and hauling

Steam was well suited to plowing large, flat fields. One common method used two engines on opposite sides of a field. A cable ran between them, and a plow moved back and forth as the cable was wound in and out. This cable method, often called cable plowing, kept the engines at the field edges while the plow did the work.

Steam machines needed a great deal of support. They used large amounts of water and coal or wood, and they needed a crew to run the boiler and the controls. Setting up and moving them took time. These demands are one reason steam lost ground to lighter gasoline and kerosene machines, which the article on why steam tractors disappeared explains in more detail.

Case steam engines and their models

J.I. Case built a large range of steam traction engines. Model names often include a rated horsepower figure, such as the 150 HP Case. That rating is a model designation and a reference point. The actual output of a machine depends on its condition, its fuel, and how it is run, so a rating in the name does not tell you exactly what it will do in the field.

If you are asking how much horsepower a particular Case steam tractor has, look up the specific model and its builder’s records. Model ratings and years can differ between catalogs and collector references, so use a source that covers your exact machine. Case stopped building steam engines long ago. The modern Case IH brand is a different product line, and it is not the same as the steam machines discussed here.

The 150 HP Case and plowing

The most famous Case model is the 150 HP Case. It was built for heavy freighting and plowing, especially where railroads did not reach. Only about nine were made in the early 1900s, and none of the originals survived. In 2018, a team led by Kory Anderson rebuilt one in Webster, South Dakota. In demonstrations, the rebuilt machine has pulled rows of as many as 44 John Deere plows. The full story of that machine, and why it is called the largest operating steam tractor, is in the biggest steam tractor ever made.

How fast and how heavy?

Steam traction engines were slow. The rebuilt 150 HP Case has a top speed of about 5.7 miles per hour, according to Guinness World Records, and it weighs about 75,000 pounds. Operating it takes at least two people: one to steer and run the engine, and another to tend the fire, water and boiler pressure.

Keep reading

If you are interested in how old these engines still are, read the oldest steam engine still in operation, which explains why that question is hard to answer. For steam machines on public roads, see are steam tractors street legal. Readers who want to compare steam with the gasoline machines that followed can start with the first gasoline tractors.

The complete guide to tractor history

The History of the Farm Tractor: From Steam to Diesel
Read the guide

Keep exploring

Guides from other topics

All topics →