Ford and Fordson

Ford Hundred Series Tractors: 540, 700, 740, 770 and 860

Ford 540, 700, 740, 770 and 860 explained: different eras, a loader sold as a 770, and why model numbers alone can mislead buyers at a farm sale.

On this page
  1. Ford 540: the 1979–1981 industrial utility
  2. Ford 700: one number, two very different tractors
  3. Ford 740: the 1950s row-crop tricycle
  4. Ford 770: a loader, not a tractor
  5. Ford 860: a 1957 model and its parts questions
  6. Sorting out model numbers before you buy

Ford model numbers are easy to mix up. Five numbers often show up together in searches, the 540, 700, 740, 770 and 860, but they come from different decades and different kinds of machine. Our research did not confirm that they belong to one named series, so this guide treats each number on its own. Reading the decade, the tractor type and the listing photos will help you avoid the common mistakes.

Ford 540: the 1979–1981 industrial utility

The Ford 540 is a two-wheel-drive industrial utility tractor built from 1979 to 1981, according to TractorData.com. It was powered by a 3.3-liter three-cylinder engine, offered in gasoline or diesel form. Published ratings put it at about 59.5 horsepower gross and 55 horsepower net.

Reported features include power steering, mechanical wet disc brakes, and an open-center hydraulic system at 2,500 psi. Transmission options included an 8-speed gear unit, a 6-speed manual reversing unit and a 4-speed power reversing unit. The rear PTO could be transmission-driven or independent, and the three-point hitch was rated to lift about 3,080 lb at 24 inches. Loader and backhoe attachments were listed for this model. Parts sellers list 540 parts by category, including 12-volt conversion kits.

Ford 700: one number, two very different tractors

The number 700 is used for two different machine families.

  • 1950s 700 and 740. The 740 is the best-documented example. Reference data gives a build span of 1954 to 1957, with a 2.2-liter four-cylinder engine running on gasoline or LP gas. Reported power is about 30 to 32 belt horsepower, with a four-speed unsynchronized transmission and a non-live 540 PTO.
  • 1970s 700 Series. Ford’s mid-1970s lineup, including the 6700, 7700, 8700 and 9700, is also called the 700 Series. These are larger tractors, and they are a different machine from the 1950s model.

If a listing says “Ford 700,” ask which family it belongs to, and check the engine and transmission against a reference for that model.

Ford 740: the 1950s row-crop tricycle

The 740 is a 1950s row-crop tricycle tractor, with build years reported as 1954 to 1957. A 1955 Ford 740 two-wheel-drive tractor has appeared in auction listings. Because it is the model most often confused with the later 700 Series, confirm its serial number and engine before you buy parts. Parts books for the 1950s models can list several closely related variants, so check the exact model against your serial number.

Ford 770: a loader, not a tractor

Ford did not make a tractor called the 770. The 770, along with the 770A and 770B, was a front-end loader for compact Ford utility tractors. Reported specifications put the loader at about 580 lb, with a breakout force of about 1,600 lb and buckets of 48 or 60 inches. Lift ratings are listed differently for each version, so check the version you are looking at.

Owners on forums often say the 770B gives smoother operation and higher lift than the 770A, but a complete 770A with good brackets and hydraulics can still be a good buy at a fair price. Most people who search “Ford 770 tractor” are looking for the Ford 7700, a much larger machine built from 1975 to 1981. Check the listing carefully before you buy. If you meant the Oliver 770, see how many horsepower an Oliver 770 has.

Ford 860: a 1957 model and its parts questions

The 860 is recorded as a 1957 model. Owners report that parts listings show both 860 and 800 series numbers, and it is not always clear whether 800-series parts will fit the 860. Fuel-system questions also come up, such as whether to add a sediment bowl or an inline filter when the tractor has a straight fuel line to the carburetor.

Do not assume parts interchange across the series. Use a parts book for the exact model, and ask a restorer or a club member to confirm fitment before you order.

Sorting out model numbers before you buy

Use these checks on any Ford model number:

  1. Decade. Is the number from the 1950s, the late 1970s or the mid-1970s?
  2. Tractor type. Is it a row-crop tractor, an industrial utility tractor or an attachment such as a loader?
  3. Serial number. Record it and compare it with a reference for that model. Our guide to finding a Ford serial number explains where to look.
  4. Engine and transmission. Count the cylinders and note the transmission type, since these change between versions.
  5. Photos and listing. Check that the photos show the model badge, the engine and the serial number area.

For the broader picture of how Ford model numbers were organized across eras, see our Ford tractor identification pillar. For larger machines of the 1960s and 1970s, see our Ford 3000, 5000 and Commander 6000 guide. For values, see what a Ford tractor is worth.

The complete guide to ford and fordson

Ford Tractor Model Identification: A Year-by-Year Guide
Read the guide

Keep exploring

Guides from other topics

All topics →