A Ford 4000 is generally reported at about 55 to 62.5 horsepower at the engine, depending on the model year and the version. The PTO and drawbar figures are lower, roughly 43 to 52 and 37 to 47.5 horsepower. Because published ratings vary by source and by test method, confirm the figure for your exact tractor before you make a buying or implement decision.
The short answer
The most useful number for most buyers is the engine rating, which sits between about 55 and 62.5 horsepower. If you plan to run a PTO-driven implement, the PTO figure is the one to check, and it is noticeably lower. If you plan to pull a load on the drawbar, use the drawbar figure instead.
Engine horsepower by version
The Ford 4000 was built in more than one engine form, so the rating depends on which version you have.
- Early four-cylinder models (about 1962 to 1964). These are reported with a 2.8-litre four-cylinder engine in gasoline or diesel form. Published engine ratings put them at about 62.5 horsepower gross.
- Three-cylinder models (about 1965 to 1975). These are reported with a three-cylinder engine, with published ratings of roughly 55 to 57 horsepower. Displacement is reported differently by source: one reference gives 3.3 litres (201 cubic inches), and another gives 3.15 litres (192 cubic inches) for the 1965 to 1967 tractors. Use the figure from a reference that matches your engine.
PTO and drawbar figures
Reported PTO figures are about 43 to 52 horsepower, and drawbar figures are about 37 to 47.5 horsepower. These are lower than the engine rating because they measure power after losses through the transmission and drivetrain. The gap between the engine, PTO and drawbar numbers is normal, so do not compare an engine figure with a drawbar figure from another machine.
Why published numbers differ
Several factors explain why one listing says 55 horsepower and another says 62.5:
- Version. The four-cylinder and three-cylinder models have different ratings.
- Gross or net. Gross ratings are measured without some accessories, and net ratings include them.
- Measurement point. Engine, PTO and drawbar ratings are measured in different places in the drivetrain.
- Test date and source. Ratings from different decades, test procedures and reference sites can disagree.
When you find a number, check which version it describes and where it was measured. The same questions come up for other Fords, covered in our guides to Ford 6600 horsepower and Ford 335 horsepower.
Transmission and other reported specs
Transmission options reported for the 4000 include a four-forward, one-reverse gear unit; a 10-speed Select-O-Speed with 10 forward and two reverse; a five-forward, one-reverse unit; and a 12-speed with 12 forward and three reverse. Reported operating weight for the 1965 to 1967 version is about 4,885 lb, with a three-point hitch rated to lift about 3,200 lb. The PTO was offered at 540 and 1000 rpm in one reference.
These options matter as much as the horsepower figure, because the transmission determines how the engine power reaches the wheels and the PTO.
How to confirm the rating for your tractor
- Identify the engine. Count the cylinders and note the fuel type. This tells you which version you have.
- Check the serial number. Compare it with a reference for the model. Our guide to telling the year of a Ford 2000 explains the general method, which also helps with other Ford models.
- Use a model-specific reference. Look for a spec sheet or service manual that lists the rating for your version.
- Ask an owner’s club. Clubs and collectors often have test records or spec sheets for particular versions.
For the wider family of Ford models of the same period, see our Ford 3000, 5000 and Commander 6000 guide. For identifying the model itself, see Ford tractor model identification. For the value of a tractor with a particular rating, see what a Ford tractor is worth.