John Deere

John Deere 3020: Specs, History and Value

John Deere 3020 guide: 1964 to 1972 New Generation tractor with a four-cylinder engine, plus specs, transmissions, hydraulics, and buying checks.

On this page
  1. Key specifications
  2. Engine options
  3. Transmissions and hydraulics
  4. 3020 vs. 4020
  5. What to check before buying
  6. Value and listings
  7. Identifying a 3020 by serial number
  8. Related guides

The John Deere 3020 is a mid-size row-crop and utility tractor from Deere’s New Generation line, built from 1964 to 1972. Most units were built in Waterloo, Iowa. It has a four-cylinder engine and produces about 70 hp at the PTO, according to collector references. This guide covers its specifications, engine and transmission options, hydraulics and hitch, how it compares with the 4020, and what to check before buying one.

Key specifications

Figures below come from collector references, including TractorData and Wikipedia, and summaries of them. Confirm them against a reference for your exact tractor before you rely on them.

  • Production: 1964 to 1972, New Generation series. Most units built in Waterloo, Iowa.
  • Power: About 70 to 71 hp at the PTO with Syncro-Range, and about 65 hp with Power Shift. Drawbar power is about 61 to 63 hp in tested figures.
  • Transmissions: Syncro-Range, 8 forward and 2 reverse, partially synchronized. Power Shift, 8 forward and 4 reverse.
  • Hydraulics: Closed-center system. Capacity is 8 gallons with Syncro-Range and 11 gallons with Power Shift.
  • Hitch and PTO: Category II three-point hitch, with 540 and 1,000 rpm rear PTO options.
  • Wheelbase: 90 inches.
  • Dimensions: About 138.5 inches long, 89.6 inches wide, and 66.5 inches high.
  • Operating weight: About 7,695 to 7,945 lb, and up to about 9,585 lb with ballast.
  • Fuel capacity: 29 gallons for diesel or gasoline, and 33.6 gallons for LP gas.

Engine options

The 3020 was offered with three engine types:

  • Diesel: 4-cylinder, naturally aspirated, 4.4 L (270 cu in).
  • Gasoline: 4-cylinder, 3.7 L (227 cu in).
  • LP gas: 4-cylinder, 3.7 L (227 cu in).

Check the fuel type first when you compare two 3020s, because the engine size and fuel capacity both change with it.

Transmissions and hydraulics

The Syncro-Range transmission has eight forward and two reverse gears. It is partially synchronized, so shifting still takes some care. The Power Shift option has eight forward and four reverse gears and allows power shifting between gears.

The closed-center hydraulics and Category II hitch are the main links to implements. Check that the hydraulic capacity and the hitch match the implements you plan to run, and test the remotes and lift under load.

3020 vs. 4020

The 3020 and the John Deere 4020 were built in the same years and belong to the same New Generation series. The 4020 has a six-cylinder engine and about 91 to 96 hp at the PTO, so it is the larger and more powerful tractor. The 3020 has four cylinders and about 70 hp at the PTO, so it is the smaller of the two.

Both offer Syncro-Range and Power Shift transmissions, and both use Category II three-point hitches. Match the power to the work you do before you choose between them.

What to check before buying

  • Engine: Look for oil leaks, smoke at startup, and any sign of overheating. Ask whether it starts and runs smoothly from cold.
  • Transmission: Run through the gears, and listen for noise or slipping. Confirm whether it has Syncro-Range or Power Shift.
  • Hydraulics: Look for leaks at the pump, hoses, and fittings, and check the lift and remotes.
  • PTO: Check that both PTO speeds engage cleanly, and inspect the shaft and guards.
  • Tires and sheet metal: Look for dry rot and cracking on the tires, and for rust and repairs on the sheet metal.
  • Electrical: Look for amateur wiring repairs, which are common on older tractors.

Value and listings

Our research did not include reliable sale prices or listing examples for the 3020, so this guide does not give a value figure. For a 3020, check recent sales of similar tractors, and compare the configuration, hours, and condition. The guide to the value of an antique John Deere explains how to estimate value and read auction terms.

Identifying a 3020 by serial number

Check the serial number to confirm the year and configuration. The plate location varies by machine, so confirm it for your model. The guide to dating a John Deere tractor by its serial number explains how to use year charts for older machines.

The complete guide to john deere

Classic John Deere Tractors: A Guide to Every Vintage Model
Read the guide

Keep exploring

Guides from other topics

All topics →