Deere’s letter series is the collector name for the company’s lettered tractors, built from the 1920s into the 1950s. The models had single-letter names such as D, A, B, G, M, and R. The letters are model names, not dates, which is why a Model B can be a 1930s machine or a 1950 machine built to a later specification. Collectors use the term to group these models, which share a design era and many of the same features.
This guide covers the main lettered models, a close look at the 1950 Model B, how to tell the models apart, and what to check before you buy one.
The letter-series models at a glance
| Model | Introduced | Notes |
|---|---|---|
| D | 1923 | Early utility tractor. Steel wheels at first, with rubber tires from 1925. Built until 1953. |
| GP (General Purpose) | 1928 | Early row-crop design. The name was chosen to avoid confusion with the D when dealers phoned in orders. |
| A | 1934 | First true row-crop design, with a three-wheel tricycle front. |
| B | Mid-1930s | Two-cylinder row-crop tractor. Built until 1952. |
| G | 1937 | Larger row-crop tractor. Renamed GM during World War II. |
| M | Developed during World War II | Smaller utility tractor. A collector source credits it with Deere’s Touch-O-Matic hydraulic system. |
| R | 1949 | One of Deere’s first diesel tractors, with a live PTO. Upgraded as the R 730 in 1959. |
Dates vary slightly by source, so check a model-specific reference before you rely on a single year.
The 1950 Model B in detail
The 1950 Model B is a good example of the late-styled B. It was built in Waterloo, Iowa, and it is powered by a two-cylinder engine that collectors often describe with the affectionate name “putt-putt.”
Key specifications from collector references include:
- Engine: 3.1 L (149 cu in) two-cylinder, available in gasoline or all-fuel versions.
- Power: About 25 drawbar horsepower and 28 belt horsepower in tested figures.
- Transmission: Six-speed manual, with six forward gears and one reverse.
- Weight: About 4,300 lb.
- Hydraulics: An optional Powr-Trol open-center system, rated at 750 psi.
- Steering and brakes: Manual steering with mechanical expanding-shoe brakes.
The late-styled B added a streamlined hood, electric starting and lighting as standard, and a padded seat mounted above the battery box. Buyers could choose between a Roll-O-Matic front end and a convertible front, which could be set up as a narrow or wide front. The B was succeeded by the Model 50.
Model A vs. Model B
The A and B are the two most often compared letter-series tractors. Both are two-cylinder row-crop machines from the same design era. The A came first, in 1934, and introduced the three-wheel tricycle front that made row-crop work easier to steer.
Differences between the two depend on the version you are looking at, including engine, weight, front-end options, and hydraulics. Compare spec sheets for the exact model and year rather than relying on general statements about size or power.
Identifying a letter-series tractor
Serial numbers are the most reliable way to check a letter-series tractor’s age and configuration. Deere’s serial plate placement varies by model, so look up the location in a reference for your specific machine. The guide to dating a John Deere tractor by its serial number explains how to use year charts for older machines.
Other features help confirm what you are looking at:
- Wheels and tires: Early D tractors ran on steel wheels, and the change to rubber tires in 1925 affects how a tractor is described and valued.
- Styling: Deere hired industrial designer Henry Dreyfuss in 1938 to restyle its agricultural machines. Restyled models from 1939 look different from the earlier “unstyled” versions.
- Front ends: Roll-O-Matic and convertible front ends differ from fixed fronts, so note what the tractor has.
Steel wheels, rubber tires and other original-equipment changes
Many letter-series tractors left the factory with one configuration and were later changed by owners or dealers. Steel wheels, rubber tires, front ends, and paint can all differ from the original. Before you buy, ask the seller what the tractor looked like when it left the factory and what has been changed since. An original configuration usually adds value, but a well-documented restoration can also be appealing.
Buying and restoring a letter-series tractor
Asking prices from listings during our research give a rough picture of the market. A 1938 Model A (unstyled, gasoline) was listed at about $3,800, and a restored 1948 Model B with a Roll-O-Matic front end was listed at about $5,500. These were asking prices, not sale prices, and they do not reflect current conditions. The guide to the value of an antique John Deere covers how to estimate value.
Before buying, check:
- Hydraulics: Look for leaks at hoses and fittings, and confirm that the Powr-Trol system works if the tractor has it.
- Brakes and steering: Expanding-shoe brakes and manual steering should work smoothly and without excessive play.
- Tires and wheels: Look for dry rot, cracking, and wheel damage.
- Frame and sheet metal: Check for rust and repairs, particularly around the frame and the battery box.
- Engine: Confirm that it starts and runs. Ask for a cold start if you can.
If the tractor is not running, factor the cost of repairs into your offer. Auction listings often describe tractors as sold as-is, with no warranty.
Safety with older Deeres
Letter-series tractors were not built with the rollover protection that modern tractors have. Take extra care on slopes and near ditches, and check whether a ROPS retrofit is available for your model. Make sure anyone running the tractor knows where the engine shutoff is. Keep the PTO shaft guarded, and disengage it before dismounting. Where a seat belt is fitted, make sure it is in good condition.