The John Deere 4020 is a six-cylinder row-crop tractor from Deere’s New Generation line, built from 1964 to 1972. It is rated at about 91 to 96 hp at the PTO and about 84 hp at the drawbar, according to collector references. This guide covers its specifications, engine and transmission options, how it compares with the smaller 3020, what to check before buying, and how to think about its value.
Key specifications
Figures below come from collector references, including TractorData, and summaries of them. Confirm them against a reference for your exact tractor before you rely on them, because figures differ by fuel type and year.
- Production: 1964 to 1972, New Generation row-crop.
- Engine: Six-cylinder, naturally aspirated.
- Power: About 91 to 96 hp at the PTO (tested) and about 84 hp at the drawbar (tested).
- Transmissions: Syncro-Range, 8 forward and 2 reverse, standard. Power Shift, 8 forward and 4 reverse, optional.
- Drive: Two-wheel drive standard, with optional hydraulic front-wheel assist on some models.
- Fuel capacity: 34 gallons for diesel or gasoline, and 45 gallons for LP gas.
- Hydraulics: Closed-center system at 2,250 psi, with a 10-gallon reservoir for Syncro-Range or 12 gallons for Power Shift.
- Hitch and PTO: Category II three-point hitch with about 3,790 lb of lift capacity. Independent 540 and 1,000 rpm PTO.
- Dimensions and weight: About 151 inches long and 89.6 inches wide, depending on axle and tire setup. About 8,225 to 9,560 lb, depending on fuel, transmission, and ballast.
Engine options by year
The 4020 used a family of six-cylinder engines, and the fuel type changes the figures:
- Diesel: 6.6 L (404 cu in) inline-six, naturally aspirated.
- Gasoline: 5.6 L (340 cu in) in 1964 and 1965, and 5.9 L (362 cu in) from 1966 to 1972.
- LP gas: 5.9 L (about 360 cu in).
If you are comparing two 4020s, check the year and fuel type first. The engine size and power figures change with them.
Transmissions and drive
The standard Syncro-Range transmission has eight forward gears and two reverse. The optional Power Shift transmission has eight forward and four reverse gears and allows gear changes without using the clutch. Test the shifting on a drive before you buy, whichever transmission the tractor has.
Most 4020s are two-wheel drive. Some have optional hydraulic front-wheel assist, which adds traction, so check whether a tractor has it.
4020 vs. 3020
The 4020 and the John Deere 3020 were built in the same years and share the New Generation design. The main difference is the engine. The 4020 has six cylinders and about 91 to 96 hp at the PTO, while the 3020 has four cylinders and about 70 hp at the PTO. The 4020 is therefore the larger and more powerful of the two.
Both offer Syncro-Range and Power Shift transmissions, and both use Category II three-point hitches. If you are choosing between them, match the power to the implements and work you have in mind.
What to check before buying
- Engine: Look for oil leaks, smoke at startup, and any signs of overheating. Ask whether it starts and runs smoothly from cold.
- Transmission: Run the tractor through the gears and listen for noise or slipping. Confirm whether it is Syncro-Range or Power Shift.
- Hydraulics: Look for leaks at the pump, hoses, and fittings, and test the lift and remotes under load if you can.
- PTO: Check that the 540 and 1,000 rpm settings engage cleanly, and inspect the shaft and guards.
- Tires and wheels: Look for dry rot, cracking, and uneven wear.
- Sheet metal and paint: Note repairs and repaints, and compare them with the serial number.
- Electrical: Look for amateur wiring repairs, which are common on older machines.
What a 4020 is worth
Value depends on condition, hours, engine type, transmission, and documentation. In the listings we reviewed, a 1969 4020 diesel was asking about $17,000. That was an asking price, not a sale price, and it may not reflect today’s market. Compare recent sales of similar tractors before you buy or sell. The guide to the value of an antique John Deere explains how to estimate value.
Identifying a 4020 by serial number
Check the serial number to confirm the year and configuration. The plate location varies by machine, so confirm it for your model. The guide to dating a John Deere tractor by its serial number explains how to use year charts for older machines.