John Deere

Why Old John Deere Two-Cylinder Tractors Are Called Johnny Poppers

Learn why old two-cylinder Deeres are called Johnny Poppers, which models had twin engines, and what to know about starting and running one.

On this page
  1. What “Johnny Popper” means
  2. Why the engines sound the way they do
  3. Which Deere tractors are two-cylinders
  4. Are two-cylinder Deeres still worth running?
  5. Where the name came from
  6. Related guides

Old John Deere two-cylinder tractors are called “Johnny Poppers” because of the sound their engines make. The nickname is widely used among collectors and older farmers, but the sources we checked do not document where it came from. This guide explains the sound, which models had two-cylinder engines, and what to know about starting and running one.

What “Johnny Popper” means

Johnny Popper is a nickname for Deere’s two-cylinder tractors. The name refers to the popping beat of the engine when it runs, which is very different from the smoother sound of a multi-cylinder engine. Many collectors consider the sound part of the appeal, and a Johnny Popper is often recognized by ear before it is seen.

Why the engines sound the way they do

Two-cylinder engines fire less often than engines with more cylinders, so each power stroke is more distinct. Collectors commonly describe the result as a popping or lope. The exact sound depends on the engine’s design, its firing interval, and how it is tuned, and those details differ from model to model. The sources we checked do not describe the engine layout in enough detail to explain each model’s sound, so treat general explanations with some caution.

Which Deere tractors are two-cylinders

Two-cylinder engines appear in many older Deere models. Examples include:

  • Model A and Model B from the 1930s and 1940s. The 1950 Model B has a 3.1 L (149 cu in) two-cylinder engine. See the John Deere letter series guide.
  • Model D and Model G, two of the most widely known letter-series tractors.
  • The numbered two-cylinder line of the 1950s, including the 40, 50, 60, 70, and 80. The John Deere 70 is one of the best-documented examples.

The New Generation tractors of the 1960s used multi-cylinder engines. The John Deere 3020 has a four-cylinder engine, and the John Deere 4020 has a six-cylinder engine. Those tractors are not usually called Johnny Poppers.

Are two-cylinder Deeres still worth running?

Many owners run their two-cylinder tractors regularly for shows, parades, and light work. Some practical points help:

  • Starting: Some early two-cylinder models were started by hand cranking, and many used compression releases. Read the operator’s manual before you start one.
  • Fuel: Ethanol-blended gasoline can damage old rubber fuel lines and carburetor parts. Use fresh fuel and inspect the lines.
  • Cooling and oil: Check the cooling system and the oil level before long runs, and follow the manual’s service schedule.
  • Safety: Many older tractors were built without rollover protection. Take care on slopes and near ditches, and make sure the operator knows where the shutoff is.

The classic John Deere tractors guide explains how these tractors fit into the wider history of Deere’s machines.

Where the name came from

The sources we checked do not document the origin of the Johnny Popper nickname. Collectors offer several explanations, but none is confirmed in the references we reviewed. If you need a documented answer for a publication or a club, check with a Deere history archive or a long-standing collector group.

The complete guide to john deere

Classic John Deere Tractors: A Guide to Every Vintage Model
Read the guide

Keep exploring

Guides from other topics

All topics →