Restoration and Repair

How much will power steering cost?

Power steering costs on a tractor depend on whether you repair a pump, buy a conversion kit or hire labor, and how much hydraulic work is involved.

On this page
  1. What drives the price
  2. Repair, convert or buy used
  3. Parts to budget for
  4. Labor and time
  5. Ways to keep costs down
  6. Warning signs of a cheap job
  7. Where to go next

It depends on the job. Repairing an existing power steering system on a tractor that already has one is usually the least expensive route. Converting a manual-steering tractor costs more, because you are adding a pump, a valve, a cylinder, hoses and fittings. Parts for popular models are often listed in the hundreds of dollars, and labor and hydraulic work can add a good deal on top. Prices change, so check current listings for your exact model before you budget.

What drives the price

  • The type of job. Repairing a worn part, replacing a pump or cylinder, and converting from manual steering are very different amounts of work.
  • The model. Parts availability varies. Common models usually have more options and lower prices. Rare models may need custom work.
  • The condition of the existing steering parts. Worn kingpins, tie rods and bushings should be replaced first, and they add to the cost.
  • Labor. A professional hydraulics job takes time, and shop rates vary by region and by shop.
  • Consumables. Hydraulic fluid, filters, hose clamps, fittings and sealant all add up.
  • Testing. Pressure and leak checks may need gauges, or a shop visit.

Car figures do not transfer. Most online cost guides for power steering cover cars, where the pump, hoses and labor times are different. Use tractor-specific parts listings and shop quotes instead.

Repair, convert or buy used

  • Repair. Replacing a worn pump, hoses, a cylinder seal or a valve on a tractor that already has power steering. This is usually the least expensive option, as long as the rest of the system is sound.
  • Convert. Adding power steering to a manual-steering tractor. This means a kit, more hydraulic plumbing, and often more installation work, so it costs more.
  • Buy used. A tractor that already has working power steering can avoid conversion costs. Check the system’s condition before you buy, and factor any needed repairs into the price you pay.

For help deciding whether the cost is justified, see Is an Old Tractor Worth Restoring? How to Decide.

Parts to budget for

  • The pump, new, remanufactured or used, and its drive components
  • A control valve and cylinder, if you are converting
  • Hoses and fittings with the correct pressure ratings
  • A reservoir, filter and mounting brackets
  • Hydraulic fluid of the type the system specifies
  • Worn steering components that must be replaced before a conversion

Labor and time

If you do the work yourself, your costs are mainly parts, fluid and tools, plus your time. Hydraulic work takes longer than it looks, because fittings have to be clean and leak-free, and the system has to be bled properly.

If you hire a shop, ask for a written quote that lists the parts, the labor hours and what is included. Check whether testing, fluid and a final check after installation are part of the price.

Ways to keep costs down

  • Compare prices for the same part from several reputable suppliers.
  • Consider a remanufactured pump from a supplier that offers a warranty. If there is a core deposit, check the return terms.
  • Replace worn steering parts while the system is apart, rather than returning later.
  • Get two or three quotes from hydraulic specialists before you commit to a conversion.
  • Do the simpler jobs yourself, and leave pressure testing to someone with the right gauges and experience.

Warning signs of a cheap job

  • Hoses or fittings with unclear pressure ratings
  • A kit that does not name your model or serial range
  • No mention of the worn steering parts that need replacing first
  • A quote that leaves out testing, fluid or a final check
  • Parts whose ratings do not match the rest of the system

A cheap kit with poor hoses or fittings can cost more in the end, through leaks, downtime and the risk of a failure under load.

Where to go next

The complete guide to restoration and repair

How to Restore a Vintage Tractor: A John Deere Restoration Walkthrough
Read the guide

Keep exploring

Guides from other topics

All topics →