There is no single horsepower figure that applies to every Ford 6600. The rating can depend on the variant, and on which measurement a source uses: engine, PTO or drawbar power. To get the right number for your tractor, check the tractor’s own plates and manual first, then cross-check any reference site.
Why one number can mislead
Tractor horsepower is reported in several ways:
- Engine (gross) hp is the power the engine makes before drivetrain losses.
- PTO hp is the power available at the rear PTO shaft.
- Drawbar hp is the power available at the hitch for pulling a load.
Drawbar figures are normally the lowest of the three. A listing or brochure that quotes one measure is not directly comparable with a source that quotes another. For a worked example with another model, see our International 300 horsepower answer.
Find the rating for your tractor
- Start with the tractor’s plates. The serial and model information identifies which Ford 6600 you have. Different configurations can carry different ratings.
- Check the operator’s manual or a dealer brochure for the same year, if you can get one. These are the closest thing to the original rating.
- Cross-check a reference site that lists specs by model and variant, such as TractorData. If two sources disagree, note which measure each one uses.
- Treat owner posts as anecdotes. Forum and social media posts can help with variant-specific details, but they are not factory specs.
Comparing a Ford 6600 with other tractors
Compare like with like. Use the same measure (PTO with PTO, drawbar with drawbar), the same test method, and the same model year or variant. A mismatch in any of these can make a comparison misleading, even when both numbers look accurate.
Buying a Ford 6600
For most buyers, condition matters more than the rated horsepower. When you look at a Ford 6600:
- Confirm the model, serial and variant against the seller’s listing.
- Check the engine for starting, running and smoke, and look for oil or coolant leaks.
- Check the hydraulics and PTO engagement.
- Check the steering, brakes and clutch.
- Check for rollover protection. Rollovers are a leading cause of death in farm tractor accidents, so ask whether the tractor has a rollover protective structure (ROPS) before you use it.