International Harvester

Farmall Cub: Specs, History and Value

Farmall Cub specs, history and buying notes for IH's small row-crop tractor, built from 1947 with a 1.0 L four-cylinder engine and a 3-speed gearbox.

On this page
  1. Farmall Cub at a glance
  2. History
  3. Engine and power
  4. Drivetrain and brakes
  5. Capacities
  6. Buying and restoring
  7. Value
  8. Where to find specs and manuals

The Farmall Cub was a small two-wheel-drive row-crop tractor that International Harvester began building in 1947. It had a 1.0 L four-cylinder gasoline engine and a 3-speed sliding-gear transmission. Sources list its output at roughly 8 to 10 hp on early models, rising to about 15 to 18 hp on later Cub and Lo-Boy versions.

Farmall Cub at a glance

The figures below are from reference sources. They can vary by year and configuration, so confirm them against your tractor’s manual.

Specification Figure
Production 1947 to 1964, per sources
Engine IH C-60, four-cylinder, 1.0 L (59.5 cu in), gasoline
Bore and stroke 2 5/8 in by 2 3/4 in
Power About 8 to 10 hp early; 15 to 18 hp on later models
Governed speed About 1,600 rpm at full load; 1,800 rpm at no load
Transmission 3-speed sliding gear, 3 forward and 1 reverse
Drive and steering Two-wheel drive, manual steering
Wheelbase About 69 in
Length About 99 in
Weight About 1,500 to 2,070 lb, depending on configuration

History

International Harvester introduced the Cub in 1947 as a compact row-crop tractor. Its offset operator station, called Cultivision, was designed to give the operator a clear view of the crop rows. Later Cub and Lo-Boy models carried the higher power ratings. Sources list production as running from 1947 to 1964.

Engine and power

  • Ignition: Magneto or battery, depending on the version.
  • Fuel: A 3/4 in updraft carburetor.
  • Governor: The governor limits engine speed to about 1,600 rpm at full load. Do not change governor settings without following the manual.

Drivetrain and brakes

  • Transmission: Three-speed sliding gear, manual.
  • Brakes: Contracting band brakes on the differential.
  • Steering: Manual.
  • Tires: Sources list a 4.00-12 (or 3-12) front and an 8-24 (or 6-24 or 7-24) rear. Confirm the size for your tractor before you buy tires.

Capacities

Per FarmallCub.com:

  • Fuel tank: 7.5 gal
  • Cooling system: 9.75 qt
  • Crankcase oil: 3 qt
  • Transmission case: 3.5 pt
  • Touch-control hydraulic system: 4.25 pt

Buying and restoring

  • Confirm the version. Standard and Lo-Boy Cubs differ, and parts follow the configuration and serial number.
  • Check the engine. Listen for knocking, look for smoke, and check for oil use.
  • Check the band brakes and steering. Make sure both work as expected before you drive the tractor.
  • Check the transmission. Look for hard shifting or noise.
  • Think about rollover protection. Small tractors like the Cub often lack modern rollover protection. Be careful on slopes and near ditches, and ask whether a rollover bar is available for your model.

Value

Value depends on originality, condition, whether the tractor runs, the quality of any restoration, the documentation that comes with it, and any included attachments. Compare recent listings and auction results rather than relying on a single asking price.

Where to find specs and manuals

  • FarmallCub.com has capacity and spec references for the Cub, and TractorData lists its specs too.
  • Parts and manuals come from specialist retailers. Check fitment against your serial number before you order.

For the larger Farmall, see Farmall H: Specs, History and Value.

The complete guide to international harvester

International Harvester and McCormick Tractors: A Collector's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →