International Harvester

How many horsepower is an International 300 tractor?

An International 300 tractor made roughly 38 hp at the drawbar and 43 hp at the belt, not 300 hp. Here's what those figures mean for buyers and owners.

On this page
  1. What the International 300 was
  2. Horsepower figures
  3. Why searches show 300 hp
  4. Checking the 300 for your tractor
  5. Buying and maintaining

An International 300 tractor made about 38 horsepower at the drawbar and about 43 horsepower at the belt. It was not a 300-horsepower tractor. Reference sources list its production as 1955 to 1956. The “300” in many searches often comes from International truck engines, which are rated in the hundreds of horsepower.

What the International 300 was

The International 300 was a utility and row-crop tractor built in 1955 and 1956. Sources also list a Farmall 300 variant. It used a 169 cubic-inch four-cylinder engine that ran on gasoline or LP gas. Listed features include the Fast Hitch and an optional Torque Amplifier. Red Power Magazine discussions describe the Farmall 300 as a step up from the older H and Super H.

Horsepower figures

Sources put the 300’s output at about 38.3 hp at the drawbar and about 42.7 hp at the belt. These are two different measurements:

  • Belt or PTO hp is power taken off the tractor, either through a belt pulley or the PTO shaft, for stationary or PTO-driven work.
  • Drawbar hp is power available at the hitch for pulling a load. It is always lower than the belt or PTO figure, because some power is lost in the drivetrain.

Because the two figures measure different things, they are not interchangeable. A listing that quotes 43 hp and a manual that quotes 38 hp can both be correct for the measure each one uses.

Why searches show 300 hp

Searches for “300 hp” often bring up International truck engines. Some International truck diesel engines are rated at 300 hp. Those are commercial engines, not tractor engines. If you are shopping for a tractor, the figure to use is in the tens of horsepower. Confirm which product you need before you buy an engine or parts.

Checking the 300 for your tractor

  • Confirm the model and variant. Use the serial number and plates to tell whether your machine is an International 300 or a Farmall 300, since the two can differ in configuration.
  • Check a spec listing. TractorData and Machinery Pete both list specs for the 300. Check which measure each figure uses.
  • Use owner forums with care. They can help with variant-specific details, but they are user reports, not factory specs.

Buying and maintaining

  • Check the engine first. Look at running condition, smoke and oil use before you look at anything else.
  • Check the Torque Amplifier if fitted. Confirm it works before you rely on the extra gears.
  • Test the hydraulics and Fast Hitch if you plan to run implements. Confirm they work with the implements you intend to use.

For other IH models from the same period, see International Harvester and McCormick Tractors and International 240 Utility and 660 Tractors.

The complete guide to international harvester

International Harvester and McCormick Tractors: A Collector's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →