The IH 806, 1206 and 1256 were the larger International Harvester tractors of the 1960s. Each came in Farmall row-crop and International standard-tread versions, and each stepped up in power from the one before. Searches for a 1266 also come up, but that model was never a production tractor. New to IH tractors? Start with International Harvester and McCormick Tractors.
IH 806 (1963 to 1967)
The 806 was built from 1963 to 1967. Sources list about 42,957 Farmall 806 row-crop units and about 8,052 IH 806 standard-tread units.
- Engines: A 5.9 L (361 cu in) six-cylinder diesel, and a 4.9 L (301 cu in) six-cylinder that ran on gasoline or LP gas.
- Power: Sources give about 95 PTO hp and about 87 drawbar hp for the diesel, and about 93 PTO hp for the gasoline and LP versions.
- Transmission: 8-speed unsynchronized, or 16-speed partial power shift with the optional Torque Amplifier.
- Hydraulics and steering: A 12 gpm open-center pump is standard, with 17 gpm optional. The 806 had hydrostatic power steering and hydraulic dry disc brakes.
- Versions: The Farmall 806 row-crop, including a High-Clear version; the IH 806 standard-tread, sometimes called the Wheatland; and the International 2806 industrial model.
IH 1206 (1965 to 1967)
The 1206 was built from 1965 to 1967 at Rock Island, Illinois. Sources describe it as International Harvester’s first turbocharged tractor and the first row-crop model to exceed 100 PTO hp. It was sold as the Farmall 1206 row-crop and as the IH standard and Wheatland versions.
- Engine: 5.9 L (361 cu in) DT-361 turbocharged six-cylinder diesel.
- Power: Nebraska test results quoted by sources show about 113 PTO hp and roughly 95 to 99 drawbar hp.
- Transmission: 8-speed unsynchronized, or 16-speed partial power shift with the Torque Amplifier.
- Fuel and weight: Most sources list a 42-gallon fuel tank; some listings say 35 gallons. The tractor weighs roughly 9,400 to 10,115 lb, and more when ballasted.
- Hydraulics and PTO: 12 gpm, up to two valves, an independent 1,000 rpm rear PTO, and a Type III rear hitch, according to TractorData.
How much horsepower does a 1206 have?
Nebraska tests quoted by sources put a 1206 at about 113 PTO hp, or roughly 95 to 99 drawbar hp. Owners often report tuning these tractors well past those figures. If you plan to add power, check the drivetrain and Torque Amplifier first, since they carry the extra load.
Year clues: sources note that 1965 models had a large white “1206” decal, while 1966 and 1967 models used a metal “1206” diesel plate.
IH 1256 (1967 to 1969)
The 1256 was built from 1967 to 1969 at Rock Island, Illinois. It was made in row-crop Farmall and standard International forms, and sources say it was replaced by the 1456.
- Engine: 407 cu in (about 6.7 L) turbocharged six-cylinder diesel.
- Power: About 113 to 116 PTO hp, or roughly 102 to 106 drawbar hp.
- Transmission: 8-speed forward and 4-speed reverse. An optional Torque Amplifier gives 16 forward and 8 reverse.
- Fuel and weight: A 42-gallon fuel tank. Shipping weight is about 9,940 lb for the Farmall row-crop and about 11,030 lb for the International standard.
- Changes noted by Octane Press: Wedge-lock wheel hubs, a larger oil cooler, spin-on fuel filters, and a unified red paint scheme without the earlier white accents.
Listings on TractorHouse ranged from about $12,000 to $34,900 in the research. Red Power Magazine users say value depends on Torque Amplifier operation, engine leaks, paint and cab condition, and regional demand.
About the 1266
International Harvester never produced a 1266 as a standard production model. Red Power Magazine users generally agree that the 1266 existed only as an early research and development prototype. It reportedly combined a DT-407 engine with parts from several earlier series.
If you are looking for a production tractor with a similar number, the closest real models are:
- The 1256 (1967 to 1969), the direct predecessor of the 1456.
- The 1066 and 1466, which came later in the 66 series.
Quick comparison
| Model | Built | Engine | Transmission | Notes |
|---|---|---|---|---|
| Farmall or IH 806 | 1963 to 1967 | 5.9 L diesel; 4.9 L gasoline or LP | 8-speed; 16-speed with Torque Amplifier | Row-crop and standard versions; about 95 PTO hp (diesel) |
| Farmall or IH 1206 | 1965 to 1967 | 5.9 L turbo diesel (DT-361) | 8-speed; 16-speed with Torque Amplifier | Sources call it the first IH turbocharged tractor |
| Farmall or IH 1256 | 1967 to 1969 | 6.7 L turbo diesel (DT-407) | 8-speed forward, 4-speed reverse; optional Torque Amplifier | Replaced by the 1456 |
| 1266 | Not a production model | Not applicable | Not applicable | Described by owners as a prototype |
What to check when buying
Owner discussions on Red Power Magazine give a useful checklist for the 806. Much of it also applies to the bigger models:
- Torque Amplifier wear. Check that it stays in fourth gear and reverse without popping out of gear.
- Front end. Check front spindle and knee wear.
- PTO and tubes. Look at the PTO shaft splines, and check the torque and draft tubes for cracks.
- Gasoline engines. Engines without replaceable sleeves can burn oil and wear out sooner than diesels.
- 1256 engine and T/A. Check for engine leaks and confirm the Torque Amplifier works before you pay.
For the smaller and earlier IH models, see International 240 Utility and 660 Tractors.